QC Inspector

Job Description:

• Reporting: The QC Inspector will report to the QC Supervisor
• The QC Inspector will liaise / coordinate promptly with the QC Supervisor and the Construction regarding the QC inspection in line with the RFI and DAILY INSPECTION AND TESTING SCHEDULE.
• To carry all relevant latest approved documents needed for inspection at the work point, e.g., RFI, Daily Inspection and Testing Schedule, approved drawings, method statement manufacturer technical data sheets, ITP etc.
• To stamp all obsolete / superseded documents and remove these documents from Site and maintain the latest documents register at the Site office. No ‘C’ or ‘R’ status document to be used on Site.
• To liaise with Construction and plan inspection on priority basis by coordinating with QC Supervisor in this regard.
• Inform findings / defects to the Construction by recording on the RFI attachment sheet and checklist, giving the photocopy of the same and taking acknowledgement on the original.
• To liaise closely with Construction to get the work rectified, re-inspected and coordinate promptly with the QC Supervisor accordingly in this regard.
• Sign off the RFI along with the status of your findings and checklist attached and handover the complete RFI to the QC Supervisor for further action.
• To liaise closely with Construction & QC Supervisor until the inspection is carried out by the Consultant.
• In case the work is not ready / noncompliance and cannot be rectified / completed within 24 hours, then the RFI will be cancelled with ‘C’ status after coordinating with the QC Supervisor and the Construction.
• QC Inspector will immediately inform the Construction for any non-compliance encountered on Site.
• QC Supervisor will also be informed promptly. If the non-compliance is not acted upon / rectified within 24 hours, a written report will be produced supplemented with photos and submitted to the QA/QC Manager via QC Supervisor.
• QC Inspector shall read the specifications, drawings, PQP, ITP, method statement, QC procedures and relevant QC documents for effective implementation related to his part. (Inspections, witnessing, monitoring, surveillance, reporting, etc. )
• To be polite and coordinate / liaise effectively without any confusion / misunderstanding to all involved.
• Be vigilant and proactive on Site, pick-up deficiencies, faults, noncompliance etc. of any work on the job Site and report immediately to the Construction and QC Supervisor and initiate the action to get it corrected / rectified ( in accordance to the Project requirements ) prior to getting it covered up.
• To ensure that no RFI is pending and to be acted upon it within 24 hours.
• To liaise with QC Supervisor in case of any difficulty / problems / issues / clarification / information related to work / inspections.
• To assist Construction team in order to resolve quality related problems.
• Being responsible for the quality of the area assigned.
• To liaise with QC Supervisor, Construction approved independent test laboratories and Consultant regarding any testing on Site (area assigned).
• To avoid delays in work and take necessary action to solve the problems.
• To ensure that ‘SAFETY’ is practiced on Site at all times. Any safety hazard noticed shall be immediately reported to the Safety Officer and concerned personnel on Site. Initiate to rectify / clear the safety hazard.
• To prepare daily QC report and submit to the QC Manager and QC Supervisor next day without delay