Basic Info

Alim shaikh

More than 15 years

Bangalore, India

Diploma

Manager

Work Experience

Manager-maintenance at Jindal aluminium ltd

Experience Details

Manager-maintenance

Manufacturing/Production

Manager

Recruited as deputy manager for Jindal aluminium ltd at Bangalore, Jindal-manufacturing aluminium profile. Responsible for overall maintenance of 7 aluminium extrusion press(680-2000 MT),aging oven, compressor, pump house, complete breakdown/preventive maintenance, Facilitate and co-ordinate all reactive (breakdown) works at factory and set priorities of work in shift.
Accountable for the maintenance budget where needs to plan, prepare forecast for the total year budget, track and control budget on periodical basis.


Company Details

Jindal aluminium ltd (multinational)

Bangalore, India

501-1000 employees

Manufacturing

N/A

May 2012 to present (4 years 7 months)
TEAM LEADER at Mahmood saeed beverage can and end ltd

Experience Details

TEAM LEADER

Manufacturing/Production

Experienced (Non-Manager)

•Recruited as team leader in can & ends manufacturing line, MS can industries is manufacturing two piece aluminum can & ends at Jeddah, Saudi Arabia.
•Actually involved in installation, commission and setup production at end line machines.
•Responsible for reviewing and implementing corrective actions, procedures and changes affecting product quality.
•Responding immediately to identify nonconforming conditions within defined time periods and with complete information to describe the actual corrective action taken.
•To ensure quality standards are maintained and to reduce spoilage to the companies objectives.
•To promote and maintain good industrial relations as safe working practices and good housekeeping.


Company Details

Mahmood saeed beverage can and end ltd (multinational)

Jeddah, Saudi Arabia

51-100 employees

FMCG

N/A

Jan 2011 to May 2012 (1 year 4 months)
Senior maintenance engineer at Almorrell development

Experience Details

Senior maintenance engineer

Manufacturing/Production

Experienced (Non-Manager)

•Recruited as a senior maintenance engineer for water bottling plant at USA air base at Kuwait & Iraq.
•Assign preventive & corrective maintenance jobs as per direction of maintenance manager, supervises and co ordinates activities of maintenance staff, maintain records, prepare reports & compose correspondence related to work.
•Helps maintenance manager in executing corrective and planned maintenance with due regards to annual scheduled maintenance plan.


Company Details

Almorrell development (multinational)

Iraq

11-50 employees

Food and Beverage Production

N/A

Nov 2008 to Dec 2010 (2 years 1 month)
Line engineer at NATIONAL FACTORY FOR CAN ENDS LTD (Saudi Arabia)

Experience Details

Line engineer

Manufacturing/Production

Experienced (Non-Manager)

•Recruited as line engineer for NAFCEL, ISO 9001-2000, ISO 14001-2004, OSHASAS 18001:1999 certified company in Jeddah (Saudi Arabia) making Aluminum easy open ends supplying to all beverage and fruit juice factory in Middle East, Far East, Asia, Europe and USA.
•Responsible to attend mechanical breakdowns, repair jobs as required with minimum downtime possible. Installation and commissioning of production equipment of Minster (USA) high Speed power press.
•Total production line troubleshooting.
•Achieve set production target with quality standards.
•Update with latest developments and modification for better results.
•Innovate for achieving accurate and repeatable fool proof method for size change, assembly practices and quick ramp up.
•Initiate short and long term projects for improving productivity.
•Follow up with stores, purchase dept for related work and communicating with various departments.
Notable accomplishment
•Undergone basic training for all kinds of end making Minster press.
•Installed and commissioned our new module – formatec shell making press 450 Strokes per minute, new compound lining machine-4nos.
•Actively involved in project management in spheres of expansion, up gradation of plants.
•Member of suggestion committee for internal developments.


Company Details

NATIONAL FACTORY FOR CAN ENDS LTD (Saudi Arabia) (multinational)

Jeddah, Saudi Arabia

51-100 employees

Packaging and Containers

N/A

Aug 2002 to Aug 2008 (6 years)
Shift Production Engineer at GEMINE STEEL TUBES LTD

Experience Details

Shift Production Engineer

Manufacturing/Production

Experienced (Non-Manager)

• Recruited as shift engineer in production and maintenance department.
• Responsible for operation and maintenance of nitrogen gas plant used for electrical heated roller hearth furnace produced by cracking of ammonia.
• Monthly material planning and work allotment.
• Organize maintenance schedules of tools, machines


Company Details

GEMINE STEEL TUBES LTD

Bangalore, India

51-100 employees

Engineering Services

N/A

Sep 2001 to Aug 2002 (11 months)
Q.C Engineer at VIBROMECH ENGINEERS AND SERVICES LTD

Experience Details

Q.C Engineer

Quality

Entry Level

• Recruited as trainee engineer in quality assurance dept- makers of dampers, harmonic balancers, oil pumps for automobiles company.
• Promoted as Q.C engineer in incoming department after 6 months


Company Details

VIBROMECH ENGINEERS AND SERVICES LTD

Bangalore, India

11-50 employees

Manufacturing

N/A

Jan 1995 to Sep 1999 (4 years 8 months)

Education

Technical Diploma in mechanical engineering

Education Details

Technical Diploma

mechanical engineering

Board of technical education, India

C / Good / 65 - 75%

Mechanical engineering

•Passed secondary school certi

Board of technical education
1990 - 1993
College Diploma in PCMB

Education Details

College Diploma

PCMB

bangurnagar junior collage, India

C / Good / 65 - 75%

PCMB_Science

N/A

bangurnagar junior collage
1990 - 1992
High School - Other

High School Details

Other

janata vidialia english medium school

India

1980

C / Good / 65 - 75%

N/A

janata vidialia english medium school
1980

Certifications

Certificate details

pre unnersity course in science

Apr 1990

580 out of 900

N/A

N/A

karnataka university

•Passed pre-university course in science (PCMB) in the year 1990. (56%)

Training and Courses

Training/Course Details

Advances in manufacturing

Feb 2001

central manufacturing technology institute at Bangalore, India.

•Advances in manufacturing- 26th to 28th February 2001 organized by central manufacturing technology institute at Bangalore, India

Training/Course Details

Pressco vision inspection

Jun 2003

press co USA

•Pressco vision inspection- press co USA in house training at nafcel (Jeddah) Saudi Arabia

Training/Course Details

• Basic level training on characteristics an applications of pneumatics and hydraulics

Feb 2009

festo (Germany) at Dubai

•Basic level training on characteristics and applications of pneumatics and hydraulics organized by festo (Germany) at Dubai 0n 12th February 2009.

This profile is not updated!
Last update more than 3 months ago.

Jobseeker photo

Profile Skills and Keywords

Advances In ManufacturingAlmorrell DevelopmentAnalyticalArabicAutoCADConveyor SystemCreativeEngineering ServicesEnglishFMCGFiller, Capper ExperienceFood And Beverage ProductionHACCP SafetyHard WorkerHindiHydraulic SystemJindal Aluminium LtdKaizens/quality ConsciousnessKannadaLine EngineerMahmood Saeed Beverage Can And End LtdManager-maintenanceManufacturingMechanical EngineeringMs OfficeNATIONAL FACTORY FOR CAN ENDS LTD (Saudi Arabia)OperationsPCMBPackaging And ContainersPneumaticsPower PressPre Unnersity Course In SciencePressco Vision InspectionProblem SolverProductionQ.C EngineerQuality AssuranceQuality ControlReverse Osmasis ExperienceSPC ProceduresSenior Maintenance EngineerShift Production EngineerTEAM LEADERTPMTeam PlayerUrdu Basic Level Training On Characteristics An Applications Of Pneumatics And Hydraulics

Self-assesed Skills

Languages

Arabic

Arabic

: Beginner

: Beginner

: Beginner

: Intermediate

Hindi

Hindi

: Advanced

: Advanced

: Fluent

: Fluent

Kannada

Kannada

: Advanced

: Advanced

: Fluent

: Fluent

Urdu

Urdu

: Beginner

: Beginner

: Fluent

: Fluent

English

English

: Fluent

: Fluent

: Fluent

: Fluent

Tools and Technologies

Ms office

Ms office

: Intermediate

: High

:

5-7 years

AutoCAD

AutoCAD

: Intermediate

: High

:

3-5 years

Fields of Expertise

hydraulic system

hydraulic system

: Advanced

: Extreme - I love it!

:

3-5 years

Pneumatics

Pneumatics

: Advanced

: Extreme - I love it!

:

3-5 years

power press

power press

: Advanced

: Extreme - I love it!

:

More than 7 years

TPM

TPM

: Advanced

: Medium

:

More than 7 years

kaizens/quality consciousness

kaizens/quality consciousness

: Advanced

: High

:

5-7 years

conveyor system

conveyor system

: Advanced

: High

:

5-7 years

filler, capper experience

filler, capper experience

: Advanced

: High

:

3-5 years

SPC procedures

SPC procedures

: Intermediate

: High

:

More than 7 years

reverse osmasis experience

reverse osmasis experience

: Intermediate

: Medium

:

3-5 years

HACCP safety

HACCP safety

: Intermediate

: High

:

3-5 years

Key Skills

Analytical, Hard worker, Creative, Problem Solver, Team Player

alim is looking for new exciting career opportunities… Please share…

Get Your own Wuzzuf Profile Now !

Employer? If you're representing an organization or an enterprise, Signup here for FREE to see Alim's full profile and find more great talent and professionals to join your team.