Basic Info

Mohamed abd elaty

3 years

Cairo, Egypt

Bachelor's Degree

Experienced

Work Experience

Senior Production and Line Quality Control Engineer at LG Electronics Egypt

Experience Details

Senior Production and Line Quality Control Engineer

Manufacturing/Production, Quality, Engineering - Mechanical/Electrical

Experienced (Non-Manager)

N/A


Company Details

LG Electronics Egypt (multinational)

Cairo, Egypt

101-500 employees

Electronics and Semiconductors, Manufacturing

Www.lge.com

Jul 2016 to present (1 year 1 month)
Production Engineer at Miraco Carrier Egypt

Experience Details

Production Engineer

Manufacturing/Production

Experienced (Non-Manager)

 Responsible for leading the production lines of Air Conditioning in Miraco Carrier, Midea Mainly in “Assembly Lines Of Residential And Commercial Lines Also For Feeders Like Sheet Metal Work Shop , Coil Work Shop And Tubing Work Shop Following the lean to improve the OEE and eliminate all wastes. Carry out final quality checking of work done. Reports daily to the plant Manager about production performance, OEE and target achievements. Maintains store inventory monitoring, production grid, manufacturing queue screen andshipment production confirmation using CMS program.  Maintain line efficiency to meet production goals Follow production schedule and work with warehouse to get orders pulled and staged. Ability to communicate with the lines and report result to production management team. Help implement solutions to support daily results, improvement in safety, quality, cost and reliability. Ability to perform on-the-job training. Maintain a clean and organized work area according to 5S and lean basics Perform Lean Audit on the Lines and Edit the Work instructions and standardization Sheets and the BOM to meet the production and the quality target.


Company Details

Miraco Carrier Egypt (multinational)

Giza, Egypt

501-1000 employees

Manufacturing

Www.miraco.com.eg

Jan 2016 to Jul 2016 (6 months)
Production and design engineer at Al Rajhi Metal industries

Experience Details

Production and design engineer

Manufacturing/Production

Experienced (Non-Manager)

1. Responsible for executing job ordered. To meet the deadlines and requests, evaluating and assigning priorities to individual projects, initiating corrective action necessary.
2. Responsible for preparing job instruction sheet for each project to carry out the job in efficient manner.
3. Make the design for the product 3D and file all calculations for all process of manufacturing the final product to be the standard and reference in the company.
4. Supervises, coordinates and schedules activates on all types of machines i.e. lathe machine, cutting, bending etc.
5. Look after assembling process regarding to production plan.
6. Thoroughly review and check up all welding process and ensure that the same is as per the requirement.
7. Review and verify finished process after sand plasting & painting in case any deficiency needs to regularize.
8. Plans organize and schedules machine maintenance activities and certify users are qualified to use equipment and machinery. Inspect heavy equipment and handle preventive maintenance or regular basis.
9. Follow up with machine operators, fork lift operators and other users operating machines and advise and assist them in their activities.
10. Process mapping of relevant production activities to identify value and non value adding activities.
11. Review calibration records of the instruments and shall generate calibration schedule which shall be the basis of initiating the calibration activities.
12. Apply lean techniques in the workplace and Conduct Lean Manufacturing and other training for all staff members
13. Prepare all formats and complete all sheets as belt up for ISO audit.


Company Details

Al Rajhi Metal industries

Dammam, Saudi Arabia

501-1000 employees

Automotive

www.alrajhicorp.com

Dec 2013 to Dec 2015 (2 years)
Mechanical Production Engineer at Asfour Crystal

Experience Details

Mechanical Production Engineer

Manufacturing/Production

Experienced (Non-Manager)

1. Making a plan for manufacturing crystal.
2. Manage the production line (organize, set up and optimize production, while observing specifications).
3. Analyze the file sent by the Engineering and Design department, then participate in defining the objectives (cost, quality, and timelines), methods and means (raw materials, human resources).
4. Observe the continued permanent employment to ensure the implementation of what is required with optimal use of equipment, as well as follow the rules of industrial safety.
5. Obligate the labor for work required of each of them with an explanation and clarification of what is needed to ensure fast delivery and quality performance.
6. Checking the validity of the work equipment and maintenance operations by technicians daily, weekly and periodic, and make a work file for each machine contained daily and weekly maintenance plans.
7. Developing processes to measure and further workshop productivity (equipment performance, team efficiency)
8. Successfully implemented 5S throughout the production bays
9. Assist in providing lean trainings for all staff members.
10. Doing quality checks.


Company Details

Asfour Crystal (multinational)

Cairo, Egypt

N/A

Luxury Goods and Jewelry

www.asfourcrystal.com

Oct 2012 to Dec 2013 (1 year 2 months)

Education

mechanical engineering in mechanical engineering

Education Details

mechanical engineering

mechanical engineering

Helwan University, Egypt

Not specified

N/A

N/A

Helwan University
2008 - 2012

Certifications

Certificate details

Lean Mnufacturing Green Belt

Nov 2013

N/A

N/A

N/A

Symbios Consulting

N/A

Training and Courses

Training/Course Details

Lean Manufacturing Green Belt

Nov 2013

Symbios Consulting

- Lean Manufacture Green Belt  Contents of the course: 1. Value to customer 2. Lead time and through put time calculations 3. Detailed process activity map. 4. 5s implementation. 5. Kaizen, PokaYoke 6. Visual factory 7. ISPC and cell design 8. Ergonomics 9. Takt time calculations 10. Quick change over & TPM and overall equipment efficiency OEE. 11. Pull system and kanban. 12. Learn to see future state. 13. High performance work team & perfection and 6 panel.

Training/Course Details

Solidworks

May 2013

Cairo University

Design

Training/Course Details

CNC

Nov 2012

Industrial Training Council

CNC Machines (Turning, Lathe, Wire Cutting,..........etc

English at SYE
Oct 2013

Training/Course Details

English

Oct 2013

SYE

English Course

Training/Course Details

AutoCad

Sep 2010

Helwan University

N/A

Training/Course Details

Inventor

Nov 2012

Jelecome

N/A

Training/Course Details

ICDL

Aug 2010

Helwan University

N/A

Training/Course Details

MS Project

N/A

This profile is fresh!
Last update 2 days ago.

Jobseeker photo

Profile Skills and Keywords

AdaptiveAnalyticalArabicAsfour CrystalAutoCADAutomotiveCNCElectronics And SemiconductorsEnglishFlexibleHard WorkerICDLInteractiveInventorLG Electronics EgyptLeadershipLean Manufacturing Green BeltLean ManufaturingLean Mnufacturing Green BeltLuxury Goods And JewelryMS ProjectManufacturingMechanical EngineeringMechanical Production EngineerMicrosoft OfficeMiraco Carrier EgyptOperationsPlannerProductionProduction And Design EngineerProduction And Process EngineerProduction EngineerQuality AssuranceQuality ControlSenior Production And Line Quality Control EngineerSolidWorks

Self-assesed Skills

Languages

English

English

: Fluent

: Fluent

: Advanced

: Advanced

Arabic

Arabic

: Fluent

: Fluent

: Fluent

: Fluent

Tools and Technologies

Lean Manufaturing

Lean Manufaturing

: Expert

: Extreme - I love it!

:

1-3 years

SolidWorks

SolidWorks

: Expert

: Extreme - I love it!

:

3-5 years

ICDL

ICDL

: Expert

: Extreme - I love it!

:

5-7 years

AutoCAD

AutoCAD

: Expert

: Extreme - I love it!

:

5-7 years

Leadership

Leadership

: Expert

: Extreme - I love it!

:

5-7 years

Microsoft Office

Microsoft Office

: Expert

: Extreme - I love it!

:

5-7 years

Fields of Expertise

Production and process engineer

Production and process engineer

: Expert

: Extreme - I love it!

:

1-3 years

Key Skills

Analytical, Planner, Hard worker, Flexible / Adaptive, Interactive

Online Presence

http://www.linkedin.com/profile/view?id=258797392&trk=hb_tab_pro_tophttps://www.facebook.com/mohammedalisayed

mohamed is looking for a new career opportunity. Please help by sharing…

Get Your own Wuzzuf Profile Now !

Employer? If you're representing an organization or an enterprise, Signup here for FREE to see Mohamed 's full profile and find more great talent and professionals to join your team.