profile-img

Hussein Mohamed Harraz

Electromechanical Engineer at Freelancer.com

San Stefano, Alexandria, Egypt

Work Experience

  • Fire & Emergency Section HeadFull Time

    Alexandria International Container Terminals

    Aug 2022 - Present -2 yrs, 11 months

    Egypt , Alexandria

    • Job Details:Preparation and maintenance of AICT fire protection system (alarm & fighting system), in coordination with related procedures and local & international codes. Set and review AICT Fire strategy, action plan and related procedures. Implement and follow fire projects installments and enhancement at the terminal. Ensure the fire alarm & fighting system, and emergency equipment is always maintained and ready for emergency cases. Lead the and execute the emergency drills, and act as the fire & emergency commander in case of emergency. Represent the company AICT in front of the civil defense represented in the Port for civil protection department and other legal authorities. Prepare the required annual training plan for fire and emergency awareness. Ensuring active and creative attendance in all HSE meetings as applicable. Attend as a fire violation reporter in accidents and damage incidents’ investigation committees. Develop studies for various fire hazard challenges that could occur within the terminal premises. Act as a coordinator between AICT and the civil defense represented in the Port for civil protection department. Correcting wrong conditions and actions for providing a safe environment for employees in the first priority and for the whole business environment Identifying and eliminating HSE & fire hazards in the workplace. Help and support the environmental Help in assuring the full compliance with the IMDG code in segregating containers within the Terminal yard. Monitors the cases of fire hazards, dangerous cargo & material storage that occurs in the terminal and identifies the course of actions to be executed according to the case. Approves the procedures and appropriate PPE for staff. Cooperates with the gate members in recommending the PPE for inspecting deferent cargo within CFS. Contributes with the HSE team in delegating various emergencies. Conducts training sessions and awareness notes for improving the performance in respect to the firefighting and IMO issues and prepares the appropriate training material. Observes the provisions of relevant AICT policies and procedures. Ensures that AICT Health, Safety & Environment policy, and procedures are observed as well as all relevant safety legislation and the provisions of Egypt Health and Safety & Environmental Acts. Contributes to the continuous improvement process and meeting business objectives. This includes providing suggestions and input to changes and improvements in all policies and procedures. Informs superior as soon as possible if any general or specific task cannot be performed adequately or timely due to influences beyond their control. Undertakes all duties and responsibilities in accordance with AICT Code of Conduct.
  • E&i EngineerFull Time

    Enerdyn Global Company

    Feb 2022 - Aug 2022 -6 months

    Egypt , Cairo

    • Job Details:Responsible for overseeing all technical issues related to the erection & installation of control systems, field instrumentation and instrumentation (I&C) equipment and all mechanical packages/systems I&C components for projects supporting the Company's power business. Coordinate with process, and mechanical Engineers assigned to the project and prepare technical memorandums and develop design criteria, SCADA system architecture, process, and instrumentation diagrams (P&IDs), SCADA network diagrams, process control functional narratives, control schematics, panel layout diagrams, and interconnection diagrams. Mentor junior engineers and designers. Assist Project Manager with planning, developing project scope of work, budgeting, cost estimating, and project scheduling tasks. Support electrical engineering and developing electrical design to support the I&C systems design. Conduct factory testing, site acceptance testing, field checkout, and startup of I&C and SCADA system startups. Utilize technical experience and expertise in the execution of I&C and SCADA projects from inception to successful startup and turnover. Review program process control logic in PLCs and configure graphical HMI for SCADA system on a variety of platforms. Configure historical data collection, archiving and generating reports on a variety of platforms. Produce effective and accurate written specifications for implementing I&C and SCADA projects. Travel to client sites locations as needed. Review procurement documentation ensuring that Contractor is fully aware of their obligations for project delivery. Review, as appropriate, non-compliance reports which may have an impact on the contract. Monitor and inspect the instrumentation and controls (I&C) erection/installation activities of the Contractor with regards to progress, compliance with the Contract and applicable codes/standards, quality, safety, and environmental acceptance. Review and approve Contractors I&C erection/installation work method statements. Ensure that Method Statements and Risk Assessments are prepared for all relevant tasks. Review and approve site related I&C equipment design/engineering matters submitted by the Contractor.
  • Robotics Instructor SteamFull Time

    Ischool

    Aug 2021 - Aug 2022 -1 yr

    • Job Details:- Instruct and Lead Membership sessions, Educational Camps, Workshops, introductory sessions, or educational Competitions for students, and Deliver knowledge using the STEAM educational approach. - Asses the assigned students and write detailed professional feedback for each student following their Assigned sessions with a maximum time limit of 24 hours. - Model, deliver, and craft rich student-centered learning experiences with a combination of pedagogical skills, Technical skills in any of the specified Areas (Computer Science – Robotics – Graphic design), and a great sense of positive Teaching. - Manage the classroom with the required session’s standards and create a positive classroom culture that encourages positive instructor–student relationships, Deep Learning, Collaboration, and Consistent Communication. - Create and implement strategies for weaving STEAM experiences into multi-disciplinary curricula for students with an age that ranges between 6 – 17. - Work in partnership with instructors and staff, modeling consistent effective teaching with technology, engagement, lesson plan design, use of technology, STEAM, and online tools. - Demonstrate fundamental knowledge of the connection between technology, and other fields of study. - Answer and support Students' questions, constantly evaluate and oversee their overall progress to enhance their knowledge and outputted work quality through session’s feedback, generating periodic Documented Evaluation Reports for updating student’s parents, group related instructors, and upper management. - Support parent’s technical/educational queries about the session's content, sessions process, and student’s progress with the help of the Team Leader Assigned.
  • Electromechanical EngineerFreelance / Project

    Freelancer.com

    Mar 2021 - Present -4 yrs, 4 months

    • Job Details:Creating 3D & 2D customized models , drawings & Mechanical Designs using SolidWorks , AutoCAD & Photoshop as per job required. Preparing & editing technical reports & documents using MS Word. Creating spreadsheets & automated calculations using MS Excel.
  • Education

    • B.Sc. Electromechanical Engineering in Electromechanical Engineering

      Alexandria University (ALEXU)

      Jan 2014 - Jan 2019 - 5 yr

    • High School - IGCSE

      El Nasr Boys School

      Jan 2014 

    Activities

    • Marketing Specialist at SPE - Society of pertoleum engineering

      Student Activity

      Jun 2016 - Jun 2018 -2 yrs

    • Mechanical Design Engineer (heavy Equipment) at AU Motorsports Formula Student Team

      Student Activity

      Jan 2017 - Dec 2017 -11 months

    • Marketing Specialist at E-Web " Electric Web"

      Volunteering

      May 2015 - May 2016 -1 yr

    Achievements

    6th position in MATE ROV Competition.

    Skills

    • SolidWorks
    • Matlab
    • AutoCAD
    • Simatic S7
    • Fire Elite
    • Proteus
    • Primavera P6
    • Microsoft Office
    • PLC Programming
    • Fire Safety
    View More

    Languages

    • English

      Fluent
    • German

      Advanced
    • French

      Intermediate

    Training & Certifications

    • Become a Project Manager

      Linkedin Learning·2021
    • IELTS

      British Council·2019
    • B1 Goethe Zertifikat

      Goethe Institut·2018
    • PLC Programming Basics

      Engineering Center Alexandria University·2017
    • CSWA

      Dassault·2016
    • MATLAB for Mechanical Engineering

      Egyptian Academy·2016
    Share this Profile