Basic Info

Noordin Abdul Sattar

More than 15 years

Villupuram, India

Diploma

Experienced

Work Experience

HVAC / Mechanical /Welding TPI QC Inspector (IPMT) at TUV NORD Middle East

Experience Details

HVAC / Mechanical /Welding TPI QC Inspector (IPMT)

Engineering - Mechanical/Electrical, Quality, Engineering - Construction/Civil/Architecture

Experienced (Non-Manager)

• Administering RFI request to Client and 3rd party and coordinate for inspection as identified in the respective discipline ITP
• Raising Non-Conformance Reports as seen during inspection and follow-up on status of rework and close-out. Attend to all potential problems to prevent occurrence of defects.
• Arranging for proper NDT requirements as per specifications
• Meeting with related department to make composite decision about schedule, planning, project development in due time achievement.
• Implementing latest tools to improve systems; conducting internal audits and ensuring compliance to quality standards.
• Appraising the prevalent systems/ processes, identifying loopholes if any and undertaking result-oriented measures for alleviating them and documenting the same.
• Coordinating with the Architects, structural department, specialist’s suppliers, and other constituencies along the various stages of the project, to provide schematic design and subsequently the detail design.
• Hydraulic analysis which helps to design the Chilled water circuit.
• Foreseeing performance bottlenecks and taking corrective measures to avoid the same.
• Networking with consultants / clients / contractors to ascertain technical specifications, construction related essentials, based on the prevalent rules.
• Reviewing operational practices, identifying areas of obstruction / quality failures and advising on system and process changes for qualitative improvement.
• Ensuring effective site management and discipline to ensure safe execution of the projects.
• Administering installation, commissioning of equipment and providing utility services to the equipment.
• Imparting training to the workforce and assisting them in meeting the assigned targets as well as operations group for smooth operation for enhancing the life of parts and equipment.
• Welding Inspection:
o Preparation of QA/QC procedures, WPS, Inspection & Test plan, weld map, NDT procedures Quality auditing
o Experiences, for example Quality Management Systems, Quality Plans, QA/QC Procedures
o Qualifying welding procedures, welder’s performance, Fabrication & welding Inspection in the field of construction and Erection, Inspection of pressure vessels, storage tanks, process piping, pipelines, Visual Inspection, Dimensional Inspection, & Documentation.
o Piping Inspection during Construction & Maintenance as per P & ID with pipeline numbering system Inspection of offshore pipelines & Structure’s
o Witnessing of hydrostatic / pressure testing of piping & valves Materials Inspection
o Plant Inspection, Visual corrosion survey of piping & oilfield static equipment's
o Familiar with good working knowledge, and use of International Codes and Standard
o Possess good knowledge in the interpretation of ASME, API, ANSI, BS Codes & specifications applicable for the Inspection of steel fabrication


Company Details

TUV NORD Middle East (multinational)

Abu Dhabi, United Arab Emirates

101-500 employees

Engineering Services, Engineering Services, Oil and Gas

N/A

Dec 2012 to present (4 years 8 months)
As HVAC / Mechanical /MEP TPI QC Inspector (IPMT)-GASCO 4th NGL Train / Takreer Oil Refining Company, GUP at Intertek Moody International Group

Experience Details

As HVAC / Mechanical /MEP TPI QC Inspector (IPMT)-GASCO 4th NGL Train / Takreer Oil Refining Company, GUP

Quality, Engineering - Mechanical/Electrical, Engineering - Construction/Civil/Architecture

Experienced (Non-Manager)

•Monitoring project activities & coordinating with various agencies to maintain targeted schedules.
•Ensuring timely completion of the project within time and budgetary parameters and interfacing with seniors for emergency conditions.
•Administering RFI request to Client and 3rd party and coordinate for inspection as identified in the respective discipline ITP
•Raising Non-Conformance Reports as seen during inspection and follow-up on status of rework and close-out. Attend to all potential problems to prevent occurrence of defects.
•Arranging for proper NDT requirements as per specifications
•Meeting with related department to make composite decision about schedule, planning, project development in due time achievement.
•Implementing latest tools to improve systems; conducting internal audits and ensuring compliance to quality standards.
•Appraising the prevalent systems/ processes, identifying loopholes if any and undertaking result-oriented measures for alleviating them and documenting the same.
•Coordinating with the Architects, structural department, specialist’s suppliers, and other constituencies along the various stages of the project, to provide schematic design and subsequently the detail design.
•Hydraulic analysis which helps to design the Chilled water circuit.


Company Details

Intertek Moody International Group

Abu Dhabi, United Arab Emirates

101-500 employees

Engineering Services, Oil and Gas, Engineering Services

N/A

Jul 2011 to Nov 2012 (1 year 4 months)
HVAC / Welding & Plumbing QC Inspector (EPC) at Daelim Saudi Arab.com- JER 2B-Saudi Aramco Total Refining & Petrochemical Co. (SATORP)

Experience Details

HVAC / Welding & Plumbing QC Inspector (EPC)

Quality

Experienced (Non-Manager)

oFM200 (fire fitting) Welding pipe fitting & piping layout drawing.
oDrainage line & Toilet line PVC pipes, pressure test and gravity test.
oHVAC piping & HVAC package, ACCU unit verifying installation as per drawing.
oRFI (Request For Inspection) list.
oChilled water pipeline system.
oFlanges, Valves, Strainers, Gasket, Insulation Materials, Doing foundation serve inspection rotating equipment and static equipment


Company Details

Daelim Saudi Arab.com- JER 2B-Saudi Aramco Total Refining & Petrochemical Co. (SATORP) (multinational)

Jubail, Saudi Arabia

More then 1000 employees

Construction - Industrial Facilities and Infrastructure, Engineering Services, Oil and Gas

N/A

Jan 2011 to Jun 2011 (5 months)
HVAC Inspector / TPI QC Inspector (IPMT) BOROUGE-2 Project at ABS Consulting Group

Experience Details

HVAC Inspector / TPI QC Inspector (IPMT) BOROUGE-2 Project

Quality

Experienced (Non-Manager)

oHeavy industrials building Substations, maintenance warehouses, Blinder silos’ buildings, pre-commissioning & commissioning, also cover chilled water pipe line welding inspection as per procedure the all HVAC units.
oFM200 (fire fitting) Welding pipe fitting & piping layout drawing.
oDrainage line & Toilet line PVC pipes, pressure test and gravity test.
oHVAC piping & HVAC package, ACCU unit verifying installation as per drawing.
oRFI (Request For Inspection) list.
oChilled water pipeline system.


Company Details

ABS Consulting Group (multinational)

Abu Dhabi, United Arab Emirates

501-1000 employees

Engineering Services, Oil and Gas, Management Consulting

N/A

Jul 2009 to Jul 2010 (1 year)
HVAC/Mechanical QA/QC Inspector at Consolidate Contracting int'l Company

Experience Details

HVAC/Mechanical QA/QC Inspector

Quality

Experienced (Non-Manager)

Heavy industrials building Substations, maintenance warehouses, Blinder silos’ buildings, pre-commissioning & commissioning, also cover chilled water pipe line welding inspection as per procedure the all HVAC units.


Company Details

Consolidate Contracting int'l Company (multinational)

Qatar

More then 1000 employees

Construction - Industrial Facilities and Infrastructure, Engineering Services, Oil and Gas

www.cccc.gr

Apr 2008 to Jul 2009 (1 year 3 months)

Education

Technical Diploma in Mechanical

Education Details

Technical Diploma

Mechanical

V. Ramakrishna Polytechnic, India

C / Good / 65 - 75%

DIPLOMA MECHANICAL ENGINEERING (DME)

N/A

V. Ramakrishna Polytechnic
1988 - 1991
High School - Other

High School Details

Other

Government High School

India

1988

Not specified

N/A

Government High School
1988

Certifications

Certificate details

• AWS Certified Welding Inspector

Jul 2009

N/A

N/A

(CWI NO: 09071611).

N/A

Certificate details

• Diploma in Refrigeration & Air-Conditioning (DRAC)

Sep 2004

N/A

N/A

N/A

• SISI Govt. of India, Pondicherry

N/A

Certificate details

• BGAS - CSWIP Painting Inspector Grade 2 - (CO0000837910)

Mar 2017

N/A

N/A

N/A

TWI

N/A

This profile is not updated!
Last update more than 3 months ago.

Jobseeker photo

Profile Skills and Keywords

ABS Consulting GroupArabicAs HVAC / Mechanical /MEP TPI QC Inspector (IPMT)-GASCO 4th NGL Train / Takreer Oil Refining Company, GUPBooksBuilding ConstructionCompaniesConsolidate Contracting Int'l CompanyConstruction - Industrial Facilities And InfrastructureDaelim Saudi Arab.com- JER 2B-Saudi Aramco Total Refining & Petrochemical Co. (SATORP)Engineering ServicesEnglishFoodHVAC & Mechanical, QC InspectorHVAC / Mechanical /MEP TPI QC Inspector (IPMT)HVAC / Mechanical /Welding TPI QC Inspector (IPMT)HVAC / Mechanical TPI QC Inspector (IPMT)HVAC / Welding & Plumbing QC Inspector (EPC)HVAC Inspector / TPI QC Inspector (IPMT)HVAC Inspector / TPI QC Inspector (IPMT) BOROUGE-2 ProjectHVAC SupevisorHVAC/Mechanical QA/QC InspectorHard WorkerHindiManagement ConsultingMechanicalOil And GasOrganizerPersonality TraitsPlannerProblem SolverQC Supervisor (HVAC & Mechanical)Quality AssuranceQuality ControlSkilled TradesSportsTUV NORD Middle EastTamilTeam PlayerTechnical Work AWS Certified Welding Inspector BGAS - CSWIP Painting Inspector Grade 2 - (CO0000837910) Diploma In Refrigeration & Air-Conditioning (DRAC)

Self-assesed Skills

Languages

English

English

: Fluent

: Fluent

: Fluent

: Fluent

Hindi

Hindi

: Advanced

: Intermediate

: Fluent

: Fluent

Tamil

Tamil

: Fluent

: Fluent

: Fluent

: Fluent

Arabic

Arabic

: Advanced

: Intermediate

: Advanced

: Advanced

Fields of Expertise

HVAC & Mechanical, QC Inspector

HVAC & Mechanical, QC Inspector

: Intermediate

: Extreme - I love it!

:

3-5 years

QC Supervisor (HVAC & Mechanical)

QC Supervisor (HVAC & Mechanical)

: Intermediate

: Extreme - I love it!

:

1-3 years

HVAC Inspector / TPI QC Inspector (IPMT)

HVAC Inspector / TPI QC Inspector (IPMT)

: Intermediate

: Extreme - I love it!

:

1-3 years

HVAC / Welding & Plumbing QC Inspector (EPC)

HVAC / Welding & Plumbing QC Inspector (EPC)

: Intermediate

: Extreme - I love it!

:

Less than 1 year

HVAC / Mechanical /MEP TPI QC Inspector (IPMT)

HVAC / Mechanical /MEP TPI QC Inspector (IPMT)

: Intermediate

: Extreme - I love it!

:

1-3 years

HVAC / Mechanical TPI QC Inspector (IPMT)

HVAC / Mechanical TPI QC Inspector (IPMT)

: Intermediate

: Extreme - I love it!

:

1-3 years

HVAC Supevisor

HVAC Supevisor

: Beginner

: Extreme - I love it!

:

1-3 years

Key Skills

Planner, Hard worker, Organizer, Problem Solver, Team Player

Online Presence

https://www.linkedin.com/profile/public-profile-settings?trk=prof-edit-edit-public_profile

I’m looking for work, please share my profile…

Get Your own Wuzzuf Profile Now !

Employer? If you're representing an organization or an enterprise, Signup here for FREE to see Noordin Abdul's full profile and find more great talent and professionals to join your team.